Skip to Content
  1. Products ...
  2. Oil/Water separators
  3. SEPKO-W

SEPKO-W

Sort By Sort By: Featured
[302-0111] Oil/Water Separator Sepko-6/1200-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6/1200-SW

Standard model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Sludge trap size 1200 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
2,610.00 €
[302-0110] Oil/Water Separator Sepko-6/600-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6/600-SW

Standard model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Sludge trap size 600 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
2,610.00 €
[302-0210] Oil/Water Separator Sepko-6/600-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6/600-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Sludge trap size 600 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
3,182.00 €
[302-0211] Oil/Water Separator Sepko-6/1200-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6/1200-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Sludge trap size 1200 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
3,182.00 €
[302-0109] Oil/Water Separator Sepko-3/600-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-3/600-SW

Standard model
Class I according to EN858-1 standard
Flow rate 3 l/s (NS3)
Sludge trap size 600 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
2,262.00 €
[302-0209] Oil/Water Separator Sepko-3/600-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-3/600-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 3 l/s (NS3)
Sludge trap size 600 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
2,834.00 €
[302-0112] Oil/Water Separator Sepko-10/2000-TSW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-10/2000-TSW

Standard model
Class I according to EN858-1 standard
Flow rate 10 l/s (NS15)
Sludge trap size 2000 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
3,483.00 €
[302-0212] Oil/Water Separator Sepko-10/2000-TRW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-10/2000-TRW

Reinforced model
Class I according to EN858-1 standard
Flow rate 10 l/s (NS10)
Sludge trap size 2000 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
4,158.00 €
[302-0108] Oil/Water Separator Sepko-1.5/600-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-1.5/600-SW

Standard model
Class I according to EN858-1 standard
Flow rate 1,5 l/s (NS1,5)
Sludge trap size 600 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
1,973.00 €
Oil/Water Separator Sepko-1.5/600-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-1.5/600-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 1,5 l/s (NS1.5)
Sludge trap size 600 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
2,523.00 €
[302-0107] Oil/Water Separator Sepko-10/1000-TSW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-10/1000-TSW

Standard model
Class I according to EN858-1 standard
Flow rate 10 l/s (NS10)
Sludge trap size 1000 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
3,483.00 €
[302-0106] Oil/Water Separator Sepko-10-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-10-SW

Standard model
Class I according to EN858-1 standard
Flow rate 10 l/s (NS10)
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
3,257.00 €
[302-0105] Oil/Water Separator Sepko-6/5000-SW (Without Shafts, Without lids, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6/5000-SW

Standard model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Sludge trap size 5000 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
3,804.00 €
[302-0104] Oil/Water Separator Sepko-6-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6-SW

Standard model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
2,610.00 €
[302-0103] Oil/Water Separator Sepko-3/5000-SW (Without Shafts, Without lids, Without bypass line, Without alarm)

Oil/Water Separator Sepko-3/5000-SW

Standard model
Class I according to EN858-1 standard
Flow rate 3 l/s (NS3)
Sludge trap size 5000 L
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
3,242.00 €
[302-0102] Oil/Water Separator Sepko-3-SW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-3-SW

Standard model
Class I according to EN858-1 standard
Flow rate 3 l/s (NS3)
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
2,262.00 €
[302-0101] Oil/Water Separator Sepko-1.5-SW (Without shaft, Without lid, Bypass line BLM-200/200, Without alarm)

Oil/Water Separator Sepko-1.5-SW

Standard model
Class I according to EN858-1 standard
Flow rate 1,5 l/s (NS1,5)
Installation depth 1,5 m from terrain to the bottom of the inlet pipe
Groundwater level below the tank‘s bottom
Material polyethylene
Sorption filter
1,973.00 €
[302-0207] Oil/Water Separator Sepko-10/1000-TRW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-10/1000-TRW

Reinforced model
Class I according to EN858-1 standard
Flow rate 10 l/s (NS1.5)
Sludge trap size 1000 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
4,158.00 €
[302-0206] Oil/Water Separator Sepko-10-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-10-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 10 l/s (NS10)
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
3,872.00 €
[302-0205] Oil/Water Separator Sepko-6/5000-RW (Without Shafts, Without lids, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6/5000-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS6)
Sludge trap size 5000 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
5,019.00 €
[302-0204] Oil/Water Separator Sepko-6-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-6-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 6 l/s (NS1.5)
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
3,182.00 €
[302-0203] Oil/Water Separator Sepko-3/5000-RW (Without Shafts, Without lids, Without bypass line, Without alarm)

Oil/Water Separator Sepko-3/5000-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 3 l/s (NS3)
Sludge trap size 5000 L
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
4,319.00 €
[302-0202] Oil/Water Separator Sepko-3-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-3-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 3 l/s (NS3)
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
2,834.00 €
Oil/Water Separator Sepko-1.5-RW (Without shaft, Without lid, Without bypass line, Without alarm)

Oil/Water Separator Sepko-1.5-RW

Reinforced model
Class I according to EN858-1 standard
Flow rate 1,5 l/s (NS1.5)
Installation depth 2,5 m from terrain to the bottom of the inlet pipe
Material polyethylene
Sorption filter
2,523.00 €